Skid Steer Attachments | dukesequipmentsales

18” High, 46” Long, ¼ Steel

1/1

18” High, 46” Long, ¼ Wall Steel Tubing

1/1

Rated at 2200lbs. for picking up round bales of hay, Tapered shaft, Bolt on shear (Easy Removal) 2 Stabilizing bars

1/1

Curved 5ft., Straight 6ft., 2200lb. lift, 4”X4” Construction, 3/8” Wall

1/1

60" - 2 Blades, ½” Thick, 18” Long & 3” Wide, Recommended for brush up to 3” diameter, Push Bar, 7 gauge steel deck, Parker Hydraulic Hoses, Omni Direct Drive Motor w/ internal cross port, low flow up to 20GPM, App. Weight is 975lbs.

72" - 3 Blades, ½” Thick, 24 ¾ “ Long & 3” Wide, Recommended for brush up to 3” diameter, Push Bar, 7 gauge steel deck, Parker Hydraulic Hoses, Omni Direct Drive Motor w/ internal cross port, low flow up to 20GPM, App. Weight is 1100lbs.

1/1

4” cutting depth, bi-directional tiller rotation for different types of soil, direct drive motor with spline gear, compatible with all low flow machines 11-20GPM, 26” deep, 24” tall, 72” cut width, 81” width with motor. 580lbs.

1/1

5/8 Steel Double Edge - 3/8 Sides - 3X3 Tubing - Greasable Pivot Opening is 11" - 46" Wide, 20" Tall, 32" Deep

1/1

Rated at 3000psi with a torque of 3039lbs., constructed with a direct drive hydraulic motor, has a 2 9/16” Round output, entire drive shaft unit can be submerged, comes with industry standard quick attach plate hoses, hose shields & flat face couplers, rated for low flow only up to 20GPM. 320lbs.
4" - 24" Bits Available

1/1

1 3/8” x 4” x 48” rated at 3700lbs. Built to fit Class II forks (3700lb. cap), Top rail is ½” with 6 stop positions at 7”, 13 ½”, 19” in each direction, The bottom rail is 3/8” bar notched for ease fork replacement. Solid 3/16” A36 Plate , 42” forks

1/1